RPM, Professional Floor Service

RPM Workers are Professionally Trained and Bonded
(888) 476-8621
(704) 799-7850
(877) 811-4448


Periodic Floor Maintenance

Glossy Floor, Periodic Floor Maintenance in Charlotte, NC

RPM Professional Floor Services LLC, serving Charlotte, NC and surrounding regional areas in the Southeast, believes that proper periodic floor maintenance procedures are essential to maintaining the quality appearance of your floors.

During all daily maintenance procedures, it is important to watch the floor for developing traffic patterns and respond to these situations accordingly.

Cleaning the Floor Using a Wet Mop
1. Sweep the area if large debris is evident. Otherwise, a thorough pass with a dust mop treated with a water-based dust mop treatment is recommended to remove dry soil and dirt.

2. Always use a neutral detergent mixed according to the manufacturer's directions when cleaning highly finished floors. Alkaline cleaners can soften and damage the floor and create an unsightly film causing additional maintenance.

 When wet mopping a floor, it is important to change the mopping solution when visible contamination occurs. There is nothing worse than mopping a floor with dirty water or using a soiled mop head. Start with clean equipment and be sure to clean it when you are done.

4. Apply mopping solution liberally (do not flood) allowing the solution to contact the floor for approximately 2-3 minutes and pick up excess with mop. Physical agitation with the mop may be necessary in badly soiled areas.

5. If using an alkaline cleaner, rinsing is required.

6. Other options include Strip & Wax or Recoating, and Burnishing.

We provide custom services: Our commercial services are extended to:

custom commercial floor care, charlotte, north carolina, Concord, Huntersville, Lincolnton, Denver, Mooresville, Rock Hill, Hichory Grove, Belmont, Salisbury

High Performance Propane Buffing Machines

Our machines are designed by top-notch manufacturers such as: Aztec, Kawasaki, Tennant and Honda. They are designed to deliver superior performance and to meet or exceed all safety and environmental regulations. No need for high voltage electric cords and generators. Leading the industry in concern for
the environment and the safety of its operators; All propane machines come standard with Emissions Shut Down System and Kill Switch.

  • Run time is 5 to 6 hours per propane cylinder.
  • Emissions protected by 3-way catalytic muffler.
  • Designed for excellent maneuverability; buffing right up to cracks and corners with ease.

But what does this mean?

It means superior performance and high-quality floor buffing. Longer operation times and fewer mechanical malfunctions. High performance delivers efficient buffing that is safe for the machine operator and the environment.


Our floor buffers are approved by both Underwriter Laboratories Inc. (UL) and the Compressed Gas Association (CGA) for meeting rigorous safety requirements set forth by UL and the CGA.


The performance of our exceptional floor buffing machines also meets emission standards set forth by the California Air Resources Board (CARB) and the
Environmental Protection Agency (EPA).

Special Features:

  • Low operation noise levels that provide safe operating conditions with fewer disruptions to working environment
  • High speed translates into signicant labor savings and increased productivity.
  • Floors that have a high gloss or “wet look” which is now the accepted benchmark within the cleaning industry.
Contact us today to schedule an appointment and to discuss the importance of periodic floor maintenance.


"We're Simply, Cleaning Up Right!"